- Generated by
1.8.16
|
UbixOS V2
2.0
|
Go to the source code of this file.
Macros | |
| #define | ANNOUNCE_INTERVAL 2 /* seconds (time between announcement packets) */ |
| #define | ANNOUNCE_NUM 2 /* (number of announcement packets) */ |
| #define | ANNOUNCE_WAIT 2 /* seconds (delay before announcing) */ |
| #define | AUTOIP_NET 0xA9FE0000 |
| #define | AUTOIP_RANGE_END (AUTOIP_NET | 0xFEFF) |
| #define | AUTOIP_RANGE_START (AUTOIP_NET | 0x0100) |
| #define | DEFEND_INTERVAL 10 /* seconds (min. wait between defensive ARPs) */ |
| #define | MAX_CONFLICTS 10 /* (max conflicts before rate limiting) */ |
| #define | PROBE_MAX 2 /* seconds (maximum delay till repeated probe) */ |
| #define | PROBE_MIN 1 /* second (minimum delay till repeated probe) */ |
| #define | PROBE_NUM 3 /* (number of probe packets) */ |
| #define | PROBE_WAIT 1 /* second (initial random delay) */ |
| #define | RATE_LIMIT_INTERVAL 60 /* seconds (delay between successive attempts) */ |
Enumerations | |
| enum | autoip_state_enum_t { AUTOIP_STATE_OFF = 0, AUTOIP_STATE_PROBING = 1, AUTOIP_STATE_ANNOUNCING = 2, AUTOIP_STATE_BOUND = 3 } |
AutoIP protocol definitions
Definition in file autoip.h.
| #define ANNOUNCE_INTERVAL 2 /* seconds (time between announcement packets) */ |
| #define ANNOUNCE_NUM 2 /* (number of announcement packets) */ |
| #define ANNOUNCE_WAIT 2 /* seconds (delay before announcing) */ |
| #define AUTOIP_RANGE_END (AUTOIP_NET | 0xFEFF) |
| #define AUTOIP_RANGE_START (AUTOIP_NET | 0x0100) |
| #define DEFEND_INTERVAL 10 /* seconds (min. wait between defensive ARPs) */ |
| #define MAX_CONFLICTS 10 /* (max conflicts before rate limiting) */ |
| #define PROBE_MAX 2 /* seconds (maximum delay till repeated probe) */ |
| #define PROBE_MIN 1 /* second (minimum delay till repeated probe) */ |
| #define RATE_LIMIT_INTERVAL 60 /* seconds (delay between successive attempts) */ |
| enum autoip_state_enum_t |
1.8.16